PART NUMBER: 30-2501
BRAND: AEM
$ 1001.64 AUD
The AQ-1 OBDII Data Logger (PN 30-2501) and AQ-1 OBDII wiring harness (PN 30-2907-96) may be the ultimate data acquisition device for sportsman racers and track day enthusiasts with 2008-up model year vehicles! It reads and records data from a 2008-up vehicle’s OBDII port using a supplied connector on the harness, providing critical engine and chassis data with minimal wiring. Just power the unit, configure the OBDII data in the free setup software and it’s ready to start logging. It also has the ability to read and clear diagnostic trouble codes (DTCs) from the OBDII port.
In addition to reading data from a vehicle's OBDII port, the AQ-1 OBDII Data Logger includes 8 analog input channels, 3 switched digital inputs, a serial port for GPS, an on-board 3-axis accelerometer and AEMnet CAN bus cable for daisy-chaining AEMnet equipped devices into the logger and storing all data in one file! See available AEMnet devices below.
EXPANDABILITY
The AQ-1 OBDII Data Logger includes an on-board 3-axis accelerometer and is expandable through eight supplied analog inputs, three switched digital inputs, AEMnet CAN bus, and an RS232 serial connection. These allow you to add specific channels that may not be present on the OBDII datastream including:
EASY SET UP
AEM’s AQ-1 Setup Software is intuitive and easy to use. Configuring the OBDII data is as simple as connecting permanent power, switched power and ground, connecting the OBDII plug and connecting the AQ-1 OBDII Data Logger to the vehicle. On average 20-40 data channels are transmitted. Simply select the channels you wish to log from the datastream, set the logging rate, name the channels if they are not already named and it is ready to go.
The setup screen is broken into a Navigation Tree for your available input channels, Device Info area for data rate and available memory, a Status Bar and a Center Pane to enable and name available logging channels. Setting logging conditions, channel options, calibration data, lap beacons, reading battery voltage, configuring the accelerometer and serial input and more are found in easily navigable subpages.
The inclusion of an AEMnet CANbus input allows for the addition of multiple channels from AEMnet equipped devices through a simple one plug connection. Adding GPS for track mapping with a Vehicle Dynamics Module (VDM), wideband AFR, pressure or temp data from X-Series Digital Performance Gauges, individual cylinder AFR from 4-Channel Wideband Controllers, engine data from an Infinity ECU or Series 2/EMS-4 Programmable Engine Management System and more is all possible without the need to wire additional inputs into the unit.
FREE AEMdata ANALYSIS SOFTWARE
AEMdata analysis software features advanced 3D graphics and a user-friendly interface. It allows users to review and playback vehicle, driver or engine data and overlay this data using charts, dash displays, gauges, or custom displays that you create, or you can select pre-defined templates. All channels are listed in the AEMdata set up menu. Users simply drag and drop the channel that they want to analyze into the window and it will display. AEMdata has powerful features including custom math channels, x/y plots and histograms, stage or circuit modes and more, all aimed at making sure you get the most out of your data. Track mapping is achieved through GPS or a combination of vehicle speed and accelerometer data, and adding data overlays to HD video is possible using the software’s powerful video encoding feature.
The AQ-1 OBDII Data Logger records and stores vehicle data from the OBDII port on 08-up vehicles, analog inputs and CAN bus enabled devices so that it can be downloaded as a single file and analyzed in our free AEMdata analysis software. Knowledge is power, and the information stored in the AQ-1 Data Logger can help users improve a vehicle’s tuning, set up and driving ability. It is ideal for all types of racing and street performance enthusiast vehicles.
AEMnet CANbus DEVICES SUPPORTED BY AQ-1 SOFTWARE VERSION 1.7
30-0300 X-Series Wideband UEGO AFR Gauge (LSU4.9)
30-0301 X-Series Oil/Fuel Pressure Gauge 0 to 100psi / 0 to 7bar
30-0302 X-Series Oil/Transmission/Water Temperature Gauge 100 to 300F / 40 to 150C
30-0305 X-Series EGT Gauge 0 to 1800F / 0 to 1000C
30-0306 X-Series Boost Gauge -30inHg to 35psi / -1 to 2.5bar
30-0307 X-Series Oil Pressure Gauge 0 to 150psi / 0 to 10bar
30-0308 X-Series Boost Gauge -30inHg to 60psi / -1 to 4bar
30-0309 X-Series Boost/Fuel Pressure Gauge 0 to 15psi SAE Only
30-0310 X-Series Inline Wideband UEGO AFR Controller (LSU4.9)
30-0313 X-Series GPS Speedometer Gauge 0 to 160mph / 0 to 260kph
30-2203 Vehicle Dynamics Module
30-2340 4 Channel Wideband UEGO Controller
30-4900 Wideband Failsafe Gauge
30-4911 Flex Fuel Wideband Failsafe
30-6905 Universal Programmable Engine Manement System. EMS 4
30-71XX Infinity ECU (All models and firmwares)
N/A Series 2 Plug & Play Engine Management System
CHANNELS 1-4 - 0-5V or optional pullup resistor for RTD/Thermistor-style sensors
Choose up to 4(Sensor Examples)
CHANNELS 5-8 - 0-5V, 0-16.5V or Frequency based sensors
Choose up to 4(Examples of sensors)
Switched Digital Inputs 1-3
Choose up to 3(Examples)
Serial/GPS
Choose 1(Examples)
AEMnet
No Technical Information available for this product
No Product Reviews available for this product